GreenWorks STA805 El Manual Del Propietario página 13

ASSEMBLY
ATTACHING THE GUARD (See Figure 2.)
NOTE: Install the guard before the attachment is connected to the lower shaft.
1. Remove supplied screw with a phillips screwdriver from the trimmer head.
2. Fit the guard into the slots on trimmer head.
3. Turn counterclockwise to lock grass deflector into place.
GRASS DEFLECTOR
4. Line up the screw hole in the grass deflector with the center hole in the trimmer head.
SCREW HOLE
5. Install supplied screw and tighten by turning clockwise with a phillips screwdriver.
SCREW
S L I D E O V E R H E A D
AND TURN COUNTER
CLOCKWISE
13
Fig. 2.1
Fig. 2.2