Troubleshooting - GreenWorks STA805 El Manual Del Propietario

TROUBLESHOOTING

Problem Cause
1. Strings are welded to
themselves.
2. Not enough string on spool.
Strings will not
advance
when using the
3. Strings are worn too short.
Auto Feed
Head:
4. Strings are tangled on spool. 4. Remove strings from spool and String
1. Cutting tall grass at ground
Grass wraps
level
around trimmer
head and motor
housing.
1. Power cord is not plugged
in or connection is loose.
Motor fails to
start when
switch trigger is
2. Household circuit breaker is
depressed.
tripped.
Solution
1. Lubricate with silicone spray.
2. Install more string. Refer to String
Replacement earlier in this manual..
3. Pull strings while alternately pressing
down on and releasing spool retainer.
Replacement earlier in this manual.
1. Cut tall grass from the top down, removing
no more than 8 inches in each pass to
prevent wrapping.
1. Plug in the power cord.
2. Check circuit breaker.
23