Switch Trigger - GreenWorks STA805 El Manual Del Propietario

OPERATION
STARTING AND STOPPING THE TRIMMER (See Figure 3.)
• Route the extension cord through the slot located on the rear of the string trimmer housing
and place underneath the cord retainer.
• Attach the outlet end of an extension cord to the plug on the rear of the string trimmer.
NOTE: Use only approved outdoor extension cords.

SWITCH TRIGGER

N O T I C E
Always use cord retainer to properly attach extension cord to string trimmer. Failure to use cord
retainer may result in damage to string trimmer and/or extension cord.
• To start the string trimmer, press the switch trigger.
• To stop the string trimmer, release the switch trigger.
ATTACH OUTLET END
OF EXTENSION CORD
HERE
OUTLET END
16
CORD WRAP
Fig. 3