GreenWorks STA805 El Manual Del Propietario página 19

OPERATION
REPLACING THE LINE (See Figure 6.)
1. Press the tabs simultaneously on the side of the trimmer head and remove cover and spool.
2. Remove any remaining line.
3. Clean dirt and debris from all parts. Replace spool if it is worn or damaged.
4. Replace with a pre-wound spool, or replace line using 10 feet (3 meters) of 0.065 inch (1.65
mm) diameter line.
W A R N I N G
Never use wire, rope, string, etc., which can break off and become a dangerous projectile.
RESPOOLING (See Figure 7.)
1. Bend one end of the line 1/4 of an inch (6 mm).
2. Insert one string into the anchor hole in the upper part of the spool while the other string into
the anchor hole in the bottom part of the spool.
Cover
Spool
19
Fig. 6
Fig. 7.1
Fig. 7.2