Megger MET1000 Guia Del Usuario página 21

Electrical Specification
Continuity :
Continuity Indicator :
Response Time of Buzzer :
Output Voltage :
Overload Protection :
AC Currant :
Range
200.0 A
Frequency Response :
Overload Protection :
Rotary Field Indication :
Sensitivity :
Frequency Range :
"L" LED is on when the signal of L2 probe lead the signal of L1 probe; "R" LED is on
when the signal of L1 probe lead the signal L2 probe.
Single-Pole Phase Check
Sensitivity :
Frequency Range :
Indicator :
www.megger.com
The built-in buzzer sounds when measuring
resistance less than 1.8 kΩ and up to 2.7 kΩ. LED
RX shows at the same time.
2.7 kHz Tone Buzzer and RX LED
< 100 ms
About 0.5 V
AC/DC 1,000 V
Resolution
0.1 A
45 Hz to 65 Hz
AC/DC 200 A
For 3 phase 4 wire system only
90 V to 1000 V (Phase-to-ground)
45 Hz to 65 Hz
90 V to 1000 V (Phase-to-Earth)
45 Hz to 65 Hz
3 kHz Tone Buzzer and ELV LED
Accuracy
±(3.0 % + 5D)
Specifications
21