Safety Information; Symbol Explanation - Megger MET1000 Guia Del Usuario

Symbols as marked on the Meter and Instruction manual
Symbol Explanation
Risk of electric shock
See instruction manual
DC measurement
AC measurement
Both direct and alternating current
Equipment protected by double or reinforced insulation
Battery
Earth
Conforms to EU directives
Application around and removal from hazardous live
conductors
Do not discard this product or throw away
CATIV: Measurement category IV: Equipment connected between the origin of the low-
voltage mains supply outside the building and the consumer unit.
CATIII: Measurement category III: Equipment connected between the consumer unit and
the electrical outlets.
CATII: Measurement category II: Equipment connected between the electrical outlets
and the user's equipment.
Making Basic Measurements
Observe all Warnings and Cautions before measurements.
G
CAUTION
„ When connecting the test leads to the device under test connect the common test
leads before connecting the live test lead. When removing the test leads, remove
the live test lead before removing the common test lead.
„ Make sure that the buzzer sound is perceptible before using it under high
background noise environment.
www.megger.com

Safety Information

5