Megger MET1000 Guia Del Usuario página 6

Voltage/Continuity/Single Pole Mode
Voltage/Continuity/Single Pole Mode
Voltage Measurement
G
LED indicates measured voltage is high than ELV limit (50 VAC and/or 120 VDC).
G
Warning
„ When batteries are not fitted or are exhausted, the tester is capable of measuring
>45 VAC and/or >35 VDC.
„ Timing Rating (tr): 30 seconds, Recovery Time (rt): 240 seconds, when measuring
>300 V, recovery time is necessary.
„ L/R LED may light up when measuring AC voltage.
„ Due to the high internal resistance, capacitive and inductive voltage (ghost voltage)
may be indicated.
6
www.megger.com