Taurus HOMELAND LASER Manual Del Usuario página 6

INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
WIFI CONNECTION & DOWNLOADING THE
APP
- To be able to use the Homeland Laser robot
from anywhere, the Taurus Homeland App has
to be downloaded.
SETUP:
- Download the Taurus Homeland App from the
App Store or Google Play.
- Sign up using your email address and a pas-
sword.
- Confirm registration using the verification code
that will be sent to your email account.
- Create your home, name your home, establish
the geographical location and select the room
where you are going to place the smart device.
- Add Homeland Laser by following the steps
described in THE QUICK GUIDE.
LUMINOUS WI-FI INDICATOR:
- To connect the Robot to the Wi-Fi:
- Press the button power interrutor (R).
- Press the Operation button (D) until the
button light flashes.
IMPORTANT:
- The device only supports a 2.4G Wi-Fi net-
work.
- If the connection fails again, then check the
following:
The robot is too far away from the router.
The Wi-Fi password is incorrect.
The Wi-Fi network is not 2.4GHz
CHARGING BASE POSITION:
- Connect the charger to the charging base.
- Place the load base flat and next to the wall.
- To receive a good signal, you must leave a
radius of 1m to the right and left and 2 meters
forward of the base.
- Connect to the power.
INSTALL SIDE BRUSHES:
- Mount the side brushes on the bottom of the
robot by pressing the brushes into its slot.