Change Of Filters - Taurus HOMELAND LASER Manual Del Usuario

EMPTYING THE POWDER TANK:
- Empty the dust container after each use.
- Uncouple the dust container from the applian-
ce.
- Open the emptying lid of the tank where indica-
ted by the arrows and pour its contents into an
appropriate waste container.

CHANGE OF FILTERS:

- Disconnect the powder container from the
appliance.
- Open the lid of the filter compartment located in
the upper part of the dust tank.
- Extract the filter and shake lightly to expose the
dust.
CHANGE OF BATTERY:
- Unscrew the screw of the battery cover and
remove the cover.
- Disconnect the plug between the battery and
the robot.
- Insert the new battery, connect it to the robot
and close the lid.