Uline H-1030 Manual De Instrucciones página 9

VALVE AND TUBE O-RING REPLACEMENT
1. Loosen screws with a flat screw driver. (See Figure 20)
2. Remove spring with needle-nose pliers.
(See Figure 21)
Figure 20
Figure 22
PAGE 9 OF 30
OPERATING INSTRUCTIONS CONTINUED
C-ring
3. Remove C-ring with C-ring pliers. (See Figure 22)
4. Remove valve and tube with needle-nose pliers.
(See Figure 23)
Figure 21
Valve and Tube
Figure 23
0421 IH-1030