Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1) press the
button;
2) the first value will start to
blink. If you want to change
the value, you need to press
the
button;
3) if you press the
4) the second value will start to
blink. If you want to change
the value, you need to press
the
button;
5) if you press the
6) the third value will start to
blink. If you want to change
the value, you need to press
the
button;
7) press the
button;
8) the fourth value will start to
blink. If you want to change
the value, you need to press
the
button;
9) press the
to exit this function. The time
will be saved.
Warning: During the time
adjustment, the date
(MM/DD/YY) will appear on
the upper line. It can be
different from the date of the
place where the machine is
installed, but the machine
will work without any
problem.
NOTE: Granizadora Digital
ECO does not display this
screen and all other screens
here reported in the dotted
square. These will only be
active in the ADVANCED
version.
DEFROST
DEFROST
ON 00:00
OFF 00:00
Defrost function: On the
screen you can see the defrost
ON and OFF time. If the two
values are the same, the
function is deactivated. In order
to change the ON and OFF
time, follow the steps below:
button;
1) press the
2) the first value of "defrost ON"
will start to blink. If you want
to change the value, you
need to press the
3) repeat the steps 1) and 2)
button;
until all ON values are set;
4) press the
to exit the change function of
"defrost ON" and go in
change function of "defrost
OFF";
5) repeat the steps 1) and 2)
until all OFF values are set;
6) press the
to exit the change function.
The time will be then saved.
button
Max Temp
NO/YES
In this screen you can activate
or deactivate the Critical
Temperature Control function.
When the critical temperature
value is (NO), the function is
deactivate; if you want to
activate it, you need to:
1) press the
2) set the value pressing the
button;
3) press the
to exit the change function.
When you switch the machine
on, if the product temperature is
button;
button;
button
button
1) press the
2) the first value will start to
3) press the
4) the second value will start to
5) press the
button;
6) the third value will start to
button
7) press the
- 24 -
greater than the one set, the
display will blink and show:
Product
T > X
The "X" value represent the
critical temperature. In order to
stop the warning signal, please
press the
button.
CLEANING
000d - ---
In this screen you can activate
or deactivate the Cleaning
warning function. This function
is used if the user wants the
machine to show a clear
warning on the display that
reminds to clean the machine.
If the Cleaning warning function
is on (000d----) it is deactivated.
In order to activate it:
button;
blink. If you want to change
the value, you need to press
the
button;
button again;
blink. If you want to change
the value, you need to press
the
button;
button;
blink. If you want to change
the value, you need to press
the
button;
to exit the change function.
When the machine is turned on
and the values (---) are zero,
the display will blink showing
the cleaning warning:
button
Publicidad
Tabla de contenido
