Electrical Connection - ZANOLLI GALASSIA Serie Manual De Instalación, Uso Y Manutención

Make sure that the lifting equipment has a lifting capacity superior to
that of the weight of the load.
All responsibility for the lifting of loads rests with the person doing the
lifting.
In all circumstances, to avoid unpredictable movement, be
aware of the equipment's centre of mass.
Take care that children do not play with the packaging materials
(e.g., plastic sheeting and Styrofoam): suffocation danger!

4.4. Electrical Connection

Before making any connection, check that the specifications of the
electrical supply to which the equipment must be connected, correspond to
the specifications of the power supply required by the apparatus itself (see
Tab. 3.1).
In compliance with the norms in force. It is obligatory to connect the
ground/earth cable (yellow-green) to an earthing system with the
same dispersion capacity as the appliance itself. The efficiency of this
system must be correctly verified according to the norms in force.
The electrical socket must be easily accessible and must not require
further location after the installation of the equipment. The distance
between the equipment and the socket must be sufficient to avoid
stretching the power cable. The power cable must never be trapped under
the feet or wheels of the equipment.
If the Power cable is damaged it must be substituted by
customer support or by a qualified service engineer so as to avoid
any risk.
Following the instructions of safety devices, start the machine and check
that the spiral rotates in the direction of the arrow marked on the frontal
frame under the bowl.
If this does not happen, invert the position of the two phase wires.
The machine does not need any further adjustment and is ready to work.
The Manufacturer does not accept responsibility for damage caused by
failure to observe the abovementioned norms.
GALASSIA
4. INSTALLATION
13