Omron CL-MIT Elite Large cuff Instrucciones De Uso página 3

1 – 2 cm
Hints
Maintenance
This devise fulfi lls the provisions of EC directive 93/42/EEC (Medical Device Directive) as well
as clause 4 of EN1060 Non-invasive sphygmomanometers Part 1: General Requirements.
Manufacturer
OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN
EU-representative
OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com
OMRON (DALIAN) CO., LTD.
Production facility
Dalian, CHINA
OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
OMRON MEDIZINTECHNIK
HANDELSGESELLSCHAFT mbH
Subsidiary
John-Deere-Str. 81a, 68163 Mannheim, GERMANY
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex
FRANCE
Taking measurements on the right arm
Apply the cuff so that the air tube is at the side of
your elbow.
Notes:
• Be careful not to rest your arm on the air tube, or
otherwise restrict the fl ow of air to the cuff.
• The cuff should be 1 to 2 cm above the elbow.
3. When the cuff is positioned correctly, close the
fabric fastener FIRMLY.
• Do not place the cuff over thick clothes and do not
roll up your sleeve if it is too tight.
• Align the cuff with the height of your heart (breast
height). If necessary use a pillow or cushion.
• Stains on the cuff can be carefully removed using a
moist cloth and soapy water.
Do not wash the cuff or make it wet!
• Do not fold the cuff or air tube together too tightly
and do not crease them.
EN
Made in China
3