INSTRUCTION MANUAL CODE 80311 REV E
AJUSTES
PROGRAMACIÓN
SETTINGS
PROGRAMMING
TRABAJO
TASK
LANGUAGE
DATE
PRINTER
UNITS
PROBE
WATER
SETUP
SELECT LANGUAGE:
ENGLISH
SETUP > LANGUAGE
POINT TO SET TIME / DATE
TIME
15
:
01
DATE
11
/
05
/
SETUP > DATE / TIME
NO
ACTIVATE
PRINTER
1 min
PRINTER
INTERVAL
PRINTER FEED
SETUP > DATE / TIME
PROBE
INTERNAL
SETUP > PROBE
TEMPERATURE
UNITS.
ºC
SETUP > UNITS
J
.P. SELECTA s.a.u.
8.2
To set operation parameters as: language, temperature units, control
probe, etc...
Point over «SETTINGS».
ENTRY
PASSWORD
Point over the parameter to be modified.
CHANGE
PASSWORD
CAL
BACK
HH:MM:SS DD/MM/YY
8.2.1
Set language between:
BACK
HH:MM:SS DD/MM/YY
8.2.2
Press over icons to modify day, month, etc...
15
Press
meters.
BACK
HH:MM:SS DD/MM/YY
8.2.3
(Optional accessory, must be factory assembled)
Enables / disables the printer and the data writing time.
"Printer Feed» feeds the printer paper.
Press
meters.
BACK
HH:MM:SS DD/MM/YY
8.2.4
(Optional accessory, must be factory assembled)
Internal probe: The autoclave controller takes the vessel water temperature
of the autoclave's bottom to control the cycle.
External probe: (accesory). Also called «heart probe», it takes as reference
the temperature of the interior of the load during the sterilization phase.
BACK
HH:MM:SS DD/MM/YY
Press
meters.
8.2.5
Choose units between ºC or ºF.
Press
BACK
meters.
HH:MM:SS DD/MM/YY
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Jan 2020
(It can be modified without notice)
Parameters settings
Language:
Date and time:
to return to the main menu or press
Printer:
to return to the main menu or press
Internal or external (heart) probe selection:
to return to the main menu or press
Temperature units:
to return to the main menu or press
Spanish.
English.
French.
to modify other para-
BACK
to modify other para-
BACK
to modify other para-
BACK
to modify other para-
BACK
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 34