Start Taking Measurements; Pause, Resume / Stop - Oregon Scientific SE331 Manual De Usuario

if encountering difficulties, refer to "Transmission signal"
section above.

START TAKiNg MEASUREMENTS

if using only the stopwatch function:
. Press MODE/- to select "EXE", "HR BELT" will be
displayed shortly after to indicate system is searching
for chest belt signal.
2. Press +/ST/SP twice to skip heart rate signal search and
start stopwatch.
MODE/-
START
If using chest belt to receive and record fitness data:
. Press MODE/- to select "EXE", "HR BELT" will be
displayed shortly after to indicate system is searching
for chest belt signal. Watch will display system used
(analog / digital), then the stopwatch screen.
2. Press +/ST/SP to start stopwatch.
+/ST/SP
+/ST/SP
MODE/-
TiP
You can view the time while exercising. Press MODE/-
to view time. To return, press MODE/- again.

PAUSE, RESUME / STOP

If you need to take a break during exercise, press +/ST/SP.
When ready, press +/ST/SP to resume exercise.
To stop exercise and save data: Press +/ST/SP to pause,
then press MODE/-.
8
+/ST/SP
START