In General; Installation; Unpacking; Standard Accessories - Enraf Nonius Endolaser 422 Manual De Uso

3 In General

Enraf-Nonius BV. develops and manufactures equipment and accessories according to the highest
standards of quality making use of the latest technology and fully adhering to current directives and
norms.
Particular attention has been paid to the design, easy operation, function and safety of the equipment and
the final result is this modern, compact unit, which offers an extremely logical operative sequence
supported by a clearly legible display. A wide range of therapeutic applications guaranteed patient and
therapist safety make, the Endolaser 422 of the highest quality.

4 Installation

4.1

Unpacking

Endolaser equipment is specially packaged for transport in a single pack complete with filling which has
been specifically studied for safe transportation and storage.
To remove the equipment from the pack, place the box on a smooth, flat surface. Open the top of the box
and remove the polystyrene filling.
Be very careful when removing the contents of the pack.
Endolaser 422 Type 1 or 2.
WARNINGS:
The manufacturer is held responsible for the fundamental safety, reliability and performance of the device
only if:
•
The electrical system of the premises complies with the appropriate regulations;
•
The device is used in accordance with the instructions for use.
CAUTION:
The correct position while moving the machine: the apparatus has to be moved exclusively by
gripping it with both hands on the curved profiles of the lid.
The perfect functionality of the appliance is guaranteed in compliance with the installation and
use regulations indicated, only with original accessories and spare parts.
4.1.1

Standard accessories:

Type 1
1422.911 Endolaser 422 – 230VAC
3444.820 Protective goggles 2 pair
1422.750 User manual
3444.290 EUR - Power cord
1422.830 Interlock connector
Laserprobe holder
2x spare fuses
ACCESSORIES that can be replaced by the RESPONSIBLE ORGANIZATION and that can affect the
compliance of the EM EQUIPMENT:
Shielded cable for handpiece connection. The cable length must be less than 3m.
The main characteristics that operator / patient protective goggles must have are the following:
808-840 DIRM LB4
>840-950 + >1070-1090 DIRM LB5
The following are provided with the safety glasses:
Case
Maintenance and cleaning instruction manual
Cleaning cloth for glasses
Necklace
Regarding the risk against which the product protects please refer to the APPENDIX C.
Type 2
1422.912 Endolaser 422 – 115 VAC
3444.820 Protective goggles 2 pair
1422.750 User manual
3444.672 UL-CSA - Power cord
1422.830 Interlock connector
Laserprobe holder
2x spare fuses
EN
3