Nogueira DPM-1 Manual De Instrucciones página 12

INSTALLING THE MACHINE AND THE MOTOR ON THE BASE:
The base is already prepared with specific places for placing the machine and supporting it, as well as
moveable rails for fastening the motor. Once the machine and the motor are placed on the base, then it
is necessary to proceed in aligning the pulleys.
Following that, install the base feet for the machine and the motor. Then place the belts and stretch
them adequately, using the lever on the base.
The machine must operate at the correct rotation speed. Therefore, we recommend using the pulleys
and belts as defined on the tables on this manual.
12
Instructions Manual