Operation - Nogueira DPM-1 Manual De Instrucciones

Operation

Before operating the machine, check the following:
See if there are no tools, equipment, or objects on the motor, or on the machine, especially inside the
intake chute.
- See if there any people or objects near the pulleys or belts;
- See if the rotation direction is correct;
- See if the machine cover is latched;
- See if the machine is properly lubricated;
- See if the counter-blade is properly adjusted to the blades;
- If it is not see the item on adjusting the counter-blade;
- See if the machine is prepared for the product which will be processed.
GRINDING DRY PRODUCTS WITH THE
CYCLONES
1- Place the box inner cover (1);
2- Place the type of sieve based on the desired
finished product (2). Insert the more curved part
first.
3- Place the moveable cover of the intake chute
(3);
4- Remove the vacuum isolator (4);
5- Place the back closure (5).
18
Instructions Manual
The product placed in the intake chute or hopper
and comes out the cyclone.