Language Selection - AGV SHARE Manual Del Usuario

SHARE headset can work in both mono and stereo mode. Mono mode means only one speaker works and
it can be used to always have one ear free to listen to environmental noises.
To switch between stereo and mono mode, connect the SHARE headset to a PC and use the proper
SHARE wizard software.
12 Available Languages
The 12 available languages are listed below:
English (British and American)
•
French
•
Italian
•
German
•
Spanish (European and Mexican)
•
Portuguese
•
Chinese
•
Russian
•
Polish
•
Japanese
•

Language Selection

Make sure the SHARE headset is in power off state.
#
Press and hold
NOW, ENTER PIN CODE 0000" prompt.
When the Blue LED and the Red LED alternately flash, release the button; the
in pairing state.
" (PLUS
Press and hold the
will hear a TTS prompt "PLEASE SELECT LANGUAGE"
The language selection mode is enabled for 20 seconds; during this time press
!
(MINUS button) to select the desired language; for each selected language, the TTS will voice
prompt the language name
!
Short press (MFB button) or do not press any
seconds and the selected language will be confirmed and stored
Text To Speech Function
(CTRL Button) for about 8 seconds, until you hear a "PLEASE PAIR PHONE
button) and
!
(MINUS button) together for more than 1 second, you
" (PLUS
button) or
- 10 -
AGV
SHARE
headset enters
" (PLUS
button) or
!
(MINUS button) for 20