AGV SHARE Manual Del Usuario página 7

Pairing is the procedure that enables connection between two different devices through wireless
technology. This pairing procedure has to be repeated only once: devices will remember other previously
paired devices.
Two paired devices can be connected together to exchange data and use them together by means of a
wireless channel. This connection can be automatically established each time two paired devices can
detect each other or by manually forcing them through a proper procedure on each of them.
Pairing with mobile phone, MP3 player or GPS
Place the SHARE headset and the mobile phone (MP3 Player or GPS) in a visible area within 1 meter
range.
Make sure the SHARE headset is in power off state.
#
Press and hold
NOW, ENTER PIN CODE 0000" prompt.
When the Blue LED and the Red LED alternately flash, release the button; the
in pairing state.
By following the mobile phone or GPS navigator instructions, turn on the Bluetooth
search for the headset devices.
From the devices found on your mobile phone, select the device named "Share Easy vx.xx" and try to
pair it by entering, if required on mobile phone, the pin code <0000>. Once paired successful, the LED
indicator will change from Blue/Red alternately to Blue flashing and the message "PAIRING
SUCCESSFUL" and "CONNECTED TO DEVICE" (followed by the proper device name) indicates
that the SHARE headset has been connected with your mobile phone.
If your mobile displays a message to confirm acceptance to access your contacts and call history,
please select "yes" to allow the SHARE headset to link to your phone book and last call to use them to
provide you with more convenient features.
Device Pairing and Connection
(CTRL Button) for about 8 seconds, until you hear a "PLEASE PAIR DEVICE
- 6 -
AGV
SHARE
headset enters
®
function, and