System Status Lights; Using The Usb Key - Bose WIRELESS COMPUTER SPEAKER Guía De Usuario

English TAB 2, 10

System status lights

The status lights on the Bose
speaker front panel indicate source selection.
AUX AUDIO IN source (page 13)
Off: ................AUX source not selected
On: ................AUX source is selected
Wireless source
Off: ................... No wireless connection
Fast Flashing: .. Wireless source is
Slow Pulse: ....... Speaker or USB key is
On: ................... Wireless source is
Brief Flash: ....... Wireless source is
(every 3 sec)
Note:
the remote causes the light for the
selected source to blink.
TAB 3, 11 TAB 4, 12
® wireless computer
connecting
in discoverable mode
connected
selected, but discon-
nected at the computer
Each button pressed on
TAB 5, 13 TAB 6, 14

Using the USB key

The USB key will automatically connect your computer
with the wireless speaker when you insert it into a USB
port. The wireless speaker must be powered on and
selected as the audio output device in order to connect.
Note:
If the USB key does not automatically connect, see
"Restoring the wireless link" on page 20.
Disconnect-reconnect button
Press to disconnect or reconnect
the wireless speaker
Power light
Off: ...................... USB key is not powered
Slow flashing: ..... Powered and available for
Fast flashing: ....... Establishing a connection
On: ....................... Connected to the wireless
Note:
If the power light is on but there is no audio, see "If you
don't hear music from the wireless speaker:" on page 8.
TAB 7, 15 TAB 8, 16
O
PERATION
connecting to the wireless
speaker
speaker
11