Hamilton Beach 14341 Manual Del Usuario página 4

840164202 ENv05.qxd:840164200 ENv01.qxd
To Dry Iron
1. Plug in iron.
2. Turn Adjustable Steam Dial to the
3. Set Temperature Settings to desired temperature. With iron
in an upright position, allow 3 minutes for iron to reach
desired temperature. Do not preheat iron with soleplate
facing down.
4. To turn iron off, set Temperature Settings to OFF ( O ).
The iron may be turned off by pressing the Temperature
Settings Button for 3 seconds.
To Steam Iron
1. Unplug iron. Open Water Tank Fill Cover. Using a cup,
slowly pour 6 ounces (3⁄4 cup) of tap water into the water
tank opening. Close Water Tank Fill Cover.
2. Plug in iron.
3. Set Temperature Settings to desired setting in steam
range. With iron in an upright position, allow 3 minutes for
iron to reach desired temperature. Do not preheat iron with
soleplate facing down.
4. Set Adjustable Steam to desired steam output.
5. To turn off, turn Adjustable Steam Dial to
Temperature Settings to OFF ( O ). (Iron may also be turned
off by pressing Temperature Settings Button for 3 seconds.)
6. Empty water from the iron following directions in "Care and
Cleaning."
Water
Please use ordinary tap water. If you have extremely hard
water, alternate between tap water and distilled water for
use in the iron.
7/14/10 1:24 PM
(Dry Iron) position.
(Dry Iron). Set
6
Page 6
Features
(on selected models)
Adjustable Steam Dial
Provides minimum steam for wool or
maximum steam for linen. Set the dial
to to change to Dry Iron.
Blast of Steam and Spray Buttons
Push Blast of Steam Button for an extra
blast of steam. Push Spray Button to
release a fine spray of water for difficult
wrinkles in cotton or linen.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord beyond colored tape
indicator on cord.
2. To store cord, press and hold the
Cord Release Button while guiding
the cord into the storage area.
WARNING! To reduce the risk of
an eye injury, hold the plug while
retracting the cord.
Blast of Spray
Steam
7