Temperature Settings - Hamilton Beach 14341 Manual Del Usuario

840164202 ENv05.qxd:840164200 ENv01.qxd
Features
(cont.)
Vertical Steam
1. Follow Steps 1 through 4 in
"To Steam Iron."
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from
garment. Press and release the Blast of Steam Button to
steam out wrinkles. Do not press Blast of Steam Button
more than once every
3 seconds.
4. To turn iron off, turn Temperature Settings to OFF ( O ).
Unplug iron.
5. Empty water from the iron following directions in "Care and
Cleaning."
NOTICE: Do not allow the hot soleplate to touch delicate
garments.
7/14/10 1:24 PM
8
Page 8

Temperature Settings

Steam To Iron
Setting
Off
Nylon
Acrylic
Silk
Polyester
Rayon
Wool
Cotton
Linen
Care and Cleaning
Iron
1. The Water Tank of your iron should be emptied after each
use. Set Temperature Settings Button to OFF ( O ). Unplug
the iron and open Water Tank Fill Cover. Turn iron upside
down until Water Tank Opening is parallel with sink. Water
will run out of water tank opening.
2. After iron has completely cooled, store in an upright posi-
tion. NOTICE: Do not store iron laying flat on soleplate.
Ironing Instructions
Dry iron on the reverse side of the fabric.
Dry iron on the reverse side of the fabric.
Dry iron on the reverse side of the fabric.
Iron with fabric still damp.
Iron on the reverse side of fabric.
Steam iron on the reverse side of fabric.
Iron while still damp using steam
and/or spray.
Iron on reverse side of fabric while still
damp.
9