Emerson RIPTIDE CF605BQ00 Manual Del Usuario página 10

3. Ceiling Fan Assembly
3.9
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the 8" Downrod (Figure 9).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 9).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.16.
NOTE: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
3.10
Separate, untwist and unkink the Three 80" Motor
Wires.
Route the Three 80" Black, Blue, and White Motor
Wires through the 8" Downrod (Figure 10).
(Continued)
PIN
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 9
THREE 80" MOTOR
WIRES (UNTWISTED)
Figure 10
10
10
GREEN GROUND WIRE
DOWNROD
HANGER BALL
DOWNROD
U.L. Model No.: CF605