3. Ceiling Fan Assembly
3.11
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the 8" Downrod (Figure 11).
Seat the Downrod in the Motor Coupler (Figure 11).
Rotate and align the Downrod holes with the Two Holes
in the Motor Coupler (Figure 11).
3.12
Align the Clevis Pin Holes in the 8" Downrod with the
Holes in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 12).
The Clevis Pin must go through the Motor Coupler
Holes. It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened.
WARNING
!
It is critical that the clevis pin in the motor coupler
is properly installed. Failure to verify that the pin is
properly installed could result in the fan falling.
(Continued)
Figure 11
11
Please contact 1-800-654-3545 for further assistance
11
emersonfans.com
U.L. Model No.: CF605