(C) Date/Time Adjustement (Rtc Adjustement) - KPS INSUTEST10000 Manual Del Usuario

INSUTEST10000

(C) Date/time adjustement (RTC adjustement)

1. Turn on the insulation tester by rotating the function rotary switch to any
position (except OFF).
2. Press SELECT button to enter the minor function selection, LCD display
the following pictures respectively:
3. Press ENTER/SAVE button to enter the Date/Time Adjustment.
4. Press SELECT button to select year, month, day, hour or minute for
adjustment, LCD display the following pictures respectively:
5. Press (value-add) " " or (value-reduce) " " " till the correct value is reached.
6. After all adjustments are complete, press ENTER/ SAVE to confirm and
save the data measured.
Note
if Date/Time unit (year, month, day, hour or minute) needs not to be
adjusted, press ESC to skip it and return back to the minor function
selection.
7. Press ESC again to return back to the main page.
- 22 -
EN