(E) Display The Data Stored (Log Display) - KPS INSUTEST10000 Manual Del Usuario

INSUTEST10000

(E) Display the data stored (LOG Display)

1. Turn on the insulation tester by rotating the function rotary switch to any
position (except OFF).
2. Press SELECT button to enter the minor function selection.
3. Press (value-add) " " or (value-reduce) " " to find the displaying of data
stored, LCD display the following pictures respectively:
4. Press ENTER/SAVE, LCD displays the picture shown in below:
5. Press ENTER/SAVE to query the subpage of data (include Resistance
value, testing voltage, PI, DAR, Saving Date & Time).
6. Press (value-add) " " or (value-reduce) " " to select the required data
value. If no data available, LCD displays the picture shown in below:
7. After the query is over, press ESC return back to the minor function
selection.
8. Press ESC again to return back to the main page.
- 24 -
EN