Battery Replacement; Maintenance & Repair - KPS INSUTEST10000 Manual Del Usuario

INSUTEST10000

BATTERY REPLACEMENT

When "Low Battery" info shows on the LCD.
Disconnect the test leads from the 10kV high voltage insulation tester, and
turn off the power.
Replace with new Alkaline batteries (1.5V "C" × 8).
MAINTENANCE & REPAIR
(A) To avoid and electric-shock or device damage, do not wet inner part of
the tester.
(B) Avoid the tester from being dropped down that would damage or
disconnect devices apart.
(C) Wipe the tester surface with soft, dry cloth and mild detergent. Prohibit
from using sand paper or solvent.
Note:
1. This tester is HV operated; user should not open the outer casing. If any
damage occurs, take the tester back to manufacturer for repair.
2. If the tester is not used for over 60 days, remove the batteries for storage.
Complete manual available on CD or download it from:
- 26 -
EN