Listening to DAB radio (R-N303D)
■
Clearing preset DAB radio stations
Clear DAB radio stations registered to the preset numbers.
1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND to select the DAB band.
3
Press OPTION to enter the "OPTION" menu.
The "OPTION" menu for TUNER is displayed
(p. 37).
4
Use the cursor keys (
Preset", and then press ENTER.
5
Select the desired preset station number by
using the cursor keys (
The selected preset number blinks on the front panel
display.
6
Press ENTER again to confirm.
"Cleared" is displayed on the front panel display.
Then, another preset station is shown on the front
panel display. When there is no more preset station,
"No Presets" is displayed, and then the display
returns to the "OPTION" menu.
To return the display to the original state, press
RETURN.
You can also use the following steps to cancel registration
of a station.
1
Press TUNER to select "TUNER" as the input
source.
2
Press CLEAR.
3
Use the PRESET j / i to select a preset
station to be cleared and press CLEAR.
If the preset station is cleared, "Cleared" appears.
Displaying the DAB information
This unit can receive various types of DAB information
when it is tuned in to a DAB radio station.
BAND
MEMORY
CLEAR
HOME
SETUP
NOW PLAYING
28
En
/
) to select "Clear
/
) repeatedly.
TUNING
PRESET
MODE
DISPLAY
DISPLAY
ENTER
RETURN
OPTION
VOLUME
MUTE
1
Press TUNER to select "TUNER" as the input
source.
2
Tune in to the desired DAB radio station.
3
Press DISPLAY.
Each time you press the key, the displayed item
changes.
INFO
Program Type
Item name
The selected item followed by a short description
appears, and then the corresponding information for
that item appears.
DAB
Sport
Information
Choice
Service Label
DLS
(Dynamic Label Segment)
Ensemble Label
Program Type
Date And Time
Audio Mode
CH Label/Freq.
Signal Quality
Note
Some information may not be available depending on the selected
DAB radio station.
Description
Station name
Information on the current station
Ensemble name
Station genre
Current date and time
Audio mode (monaural/stereo)
and bit rate
Channel label and frequency
Signal reception quality
(0 [none] to 100 [best])