Playing Back Music With Airplay; Playback Of Itunes/Iphone Music Contents - Yamaha R-N303 Manual De Instrucciones

The AirPlay function allows you to play back iPhone/
iPad/iPod touch/iTunes music on the unit via network.
PC
iTunes
Router
iPhone/iPad/
iPod touch
Note
To use this function, the unit and your PC or iPhone must be
connected to the same router (p. 13). You can check whether the
network parameters (such as the IP address) are properly assigned
to the unit in "Information" (p. 40) in the "SETUP" menu.
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion or later, and PC
with iTunes 10.2.2 or later.
(as of June 2017)
Playback of iTunes/iPhone music
contents
Follow the procedure below to play back iTunes/iPhone
music contents on the unit.
1
Turn on the unit, and start iTunes on the PC
or display the playback screen on the
iPhone.
If the iTunes/iPhone recognizes the unit, the AirPlay
icon appears.
iOS 10 (example)
Note
If the icon does not appear, check whether the unit and PC/iPhone
are connected to the router properly.
2
On the iTunes/iPhone, click (tap) the AirPlay
icon and select the unit (network name of the
unit) as the audio output device.
3
Select a song and start playback.
The unit automatically selects "AirPlay" as the input
source and starts playback. The playback information is
displayed on the front display.

Playing back music with AirPlay

This unit
Playback starts
iTunes (example)
Note
• If you press the DISPLAY repeatedly, you can switch the
playback information on the front display (p. 20).
• You can turn on the unit automatically when starting playback
on iTunes or iPhone by setting "Standby (Network Standby)"
(p. 41) in the "SETUP" menu to "On" or "Auto".
• You can edit the network name (the unit's name on the network)
displayed on iTunes/iPhone in "Network Name" (p. 41) in the
"SETUP" menu.
• You can adjust the unit's volume from the iTunes/iPhone during
playback.
CAUTION
Using iTunes or an iPhone to adjust the volume may make
the volume unexpectedly loud, which could result in
damage to your hearing or to the device. Stop playback
immediately on iTunes or on your iPod if the playback
volume is too loud. We recommend that you use the
"Vol.Interlock (Volume interlock)" (p. 38) on the Option
menu to limit the changes in volume from iTunes or your
iPhone beforehand.
Use the following remote control keys to control
playback.
Keys
p/ e
s
b / w
Playback
keys
f / a
REPEAT
SHUFFLE
Playing back music with AirPlay
Functions
Stops/resumes playback.
Stops playback.
Skips forward/backward.
Changes the Repeat settings.
Changes the Shuffle settings.
35
En