Yamaha R-N303 Manual De Instrucciones página 46

Configuring various functions (SETUP menu)
Network
Configures the network settings.
■
Connection
Selects the network connection method.
Select this option when you want to connect
the unit to a network with a commercially-
Wired
available network cable (p. 13).
Select this option when you want to connect
the unit to a network via the wireless router or
Wireless
access point (p. 15, 16, 16).
Select this option when you want to connect a
W.Direct
mobile device to the unit directly. For details
(Wireless
on settings, see "Connecting a mobile device
Direct)
to the unit directly (Wireless Direct)" (p. 17).
Note
If the unit is operating in MusicCast Extend mode, "Extend" will
be displayed. For details on Extend mode, see the MusicCast
Setup Guide on the Yamaha website.
■
Information
Displays the network information on the unit.
Appears if an update for this unit's firmware is
NEW FW
available (p. 45).
The connection status of the network.
STATUS
Status of the MusicCast Network. If "Ready"
appears, you can use the MusicCast
MC NET
CONTROLLER app.
Displays MAC address of the unit. MAC
address will vary depending on the connection
MAC
method (wired LAN connection or wireless
LAN / Wireless Direct connection).
(When using wireless LAN connection or
Wireless Direct) The SSID of this unit on the
SSID
wireless network.
IP address
IP
Subnet mask
SUBNET
The IP address of the default gateway
GATEWAY
The IP address of the primary DNS server
DNS P
The IP address of the secondary DNS server
DNS S
40
En
■
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Does not use a DHCP server. Configure the
network parameters manually. For details, see
Off
"Manual network settings" below.
Uses a DHCP server to automatically obtain the
On (default)
unit's network parameters (such as IP address).
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (
parameter type.
Specifies an IP address.
IP
Specifies a subnet mask.
SUBNET
Specifies the IP address of the default gateway.
GATEWAY
Specifies the IP address of the primary DNS
DNS P
server.
Specifies the IP address of the secondary DNS
DNS S
server.
3
Use the cursor keys (
position.
IP
Address1••192›
(Example: IP address setting)
Use the cursor keys ( / ) to switch between
segments (Address1, Address2...) of the address.
4
Use the Cursor keys (
value.
5
To exit from the menu, press SETUP.
■
DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
Does not allow DMCs to control playback.
Disable
Enable
Allows DMCs to control playback.
(default)
Note
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
/ ) to select a
/ ) to select the edit
SP A
/ ) to change a