Publicidad
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
NOTE: Drilling into 2 studs is only available for 16" to 24" stud spacing.
NOTE: Drilling into 3 studs is only available for 16" to 20.25" stud spacing.
3
3
2-Stud Installation
3-Stud Installation
2 ¾ in. (70 mm)
4X
7/32 in. (5.5
6X
mm)
16
Publicidad
