Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
S
t
c
et
hermoStat to
harge
If required additional charging amount cannot be charged to
the system without operation, then use this "CHARGE MODE".
Please follow the following sequence to enter CHARGE
MODE.
When adjusting "Sub cooling" (Refer page 49), use this
"CHARGE MODE".
CHARGE MODE allows for charging of the system. System
operates for a duration of approximately one hour while the
equipment runs at full capacity. After one hour, the CHARGE
MODE ends and the system resumes normal thermostat
operation.
Before starting the CHARGE MODE, turn off the electric
heater.
1. On the "HOME" screen, select "MENU".
NOTE: Ensure the thermostat is in OFF. Select
"SYSTEM" menu. Choose "OFF" before "CHARGE
MODE".
2. Follow procedure to enter "ComfortNet User Menu" of
"Outdoor Unit" (Refer page 44). Then, scroll down
and select "SYS SETUP2".
3. Select "CHARGE MODE".
m
ode
47
Publicidad
Tabla de contenido
