Adjusting The Level; Timer Play - Yamaha CDC-697 Manual De Instrucciones

VARIOUS FUNCTIONS

Adjusting the Level

■ Adjusting the level of signals output
into an amplifier, etc.
You can adjust the level of sound signals output from the
LINE OUT terminals on the rear panel into an amplifier,
etc.
—
For optimum sound quality
* When the DIGITAL AUDIO OUT (OPTICAL) terminal
is used for the connection, set the level of output signals
to max.
* The level of output signals can be checked in the display.
CK
16
En
01_En_03_play_CDC-697_G.pm
OUTPUT LEVEL —
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
16

Timer Play

You can start playback at any specified time by connecting a
timer (sold separately). (For details, refer to the owner's
manual of the timer.)
1 Select the desired play mode (1DISC or 5DISCS).
2 Press the POWER button to turn the unit off.
3 Press the POWER button while pressing the w/d button
on the front panel.
Shortly thereafter, "TIMER P. ON" appears in the
display and the timer play function is on.
(When the timer play function is already on, in which
case, "TIMER P. OFF" appears in the display and timer
play function is off. In this case, repeat the procedure in
steps 2 and 3 to set the timer play function to on.)
4 Set the timer to the desired time.
When the set time comes, the unit turns on and starts
playback.
NATURAL SOUND COMPACT DISC PLAYER CDC-697
POWER
ON OFF
DISC
STANDBY
1 2 3 4 5
/ON
2,3
7/6/06, 0:55
PLAYXCHANGE
3