Hach PAH500 Manual Del Usuario página 12

3.3 Install a digital extension cable
Use a digital extension cable to connect the digital gateway to an SC1000 Controller. Refer to
Figure 7. Refer to Accessories on page 25 for the cable lengths available. Prevent kinks and tight
bends in the cable. Install the supplied ferrites on the cable. The ferrite locations on the cable are
important. Refer to Figure 7.
Figure 7 Install a digital extension cable
3.4 Scan for new devices
If the controller does not recognize the sensor unit, select SC1000 SETUP > DEVICE
MANAGEMENT > SCANNING FOR NEW DEVICES or restart the controller.
12 English