Dell PowerConnect 6024 Guía De Introducción página 13

Wizard Step 2
Please enter the IP address of the Management System (A.B.C.D)
or wildcard (0.0.0.0) to manage from any Management
Station:[0.0.0.0]
1
Enter
– Management System IP address for example "0.0.0.0", or wildcard mask.
2
Press Enter.
Wizard Step 3
The following information appears:
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts
and changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name:
Please enter the user password:
Please reenter the user password:
1
Enter:
– User name, for example "admin"
– Password and password confirmation.
NOTE:
If the first and second password entries are not identical, the wizard prompts you to enter
identical passwords.
2
Press Enter.
3
Enter the password, for example "secret".
4
Press enter.
5
Confirm the password, by entering the identical string, for example, "secret".
6
Press Enter.
Getting Started Guide
11