Dell PowerConnect 6024 Guía De Introducción página 15

Wizard Step 6
The following information appears:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file.
If the information is incorrect, select (N) to discard
configuration and restart the wizard: [Y/N]
1
Enter [Y] to complete the Setup Wizard or enter [N] to skip to restart the wizard. If you enter [Y]
the following information appears:
Configuring SNMP management interface.
Configuring user account.......
Configuring IP and subnet......
...............................
Thank you for using Dell Easy Setup Wizard. You will now enter
CLI mode.
Wizard Step 7
The CLI prompt appears.
You can now manage the device from the already connected Console port or remotely through
the Out-of-Band Ethernet Management Port interface defined during the initial configuration.
Getting Started Guide
13