Dell PowerConnect 6024 Guía De Introducción página 25

注 :
•
• IP
•
注 :
初始配置程序
Dell PowerConnect
[ctrl+z]
• SNMP
•
•
•
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running easily and quickly.
You can also skip the setup wizard, and enter CLI mode to
manually configure the switch if you prefer.
You can exit the Setup Wizard at any time by entering [ctrl+Z].
The system will prompt you with a default answer; by pressing
enter, you accept the default.
After you configure basic settings using the Setup Wizard, you can
manage the device from the Out-of-band ethernet management
port.
Would you like to enter the setup wizard? (Y/N)[Y]
Dell
Enter
在您使用 "安装向导"配置完基本设置之后，您可以从带外以太网管理端口管理设备。
IP
IP
CLI CLI
SNMP IP
IP
CLI
[ctrl+Z]
(Y/N)[Y]
HTTP Web
(CLI)
23