Software Functions; Installation And Data Transmission - Microlife BP3GT1-6X Manual De Instrucciones

6. Software functions

This unit can be used in connection with your personal
computer (PC) running the PC Link blood pressure
analyzer software. Your PC will allow a capacity of
monitoring 80 patients, each with 1000 readings (note:
overuse will lower system efficiency). The memory
data can be transferred to the PC by connecting the
monitor via the included USB cable.
Note: The software does not work with Mac computers.

6.1. Installation and data transmission

a) Insert CD into CD ROM drive of your PC. The
installation will start automatically. If not, click on
SETUP.EXE.
b) Connect the monitor via USB cable with the PC.
Three horizontal bars will appear on the display and
last for 3 seconds.
c) The bars will then flash to indicate that the connec-
tion between computer and device has been
successfully made. As long as the cable is plugged,
the bars will keep flashing and the screen is
disabled.
During the connection, the device is completely
controlled by the computer. Please refer to the "Help"
file in the software for detailed instructions or call
1-800-568-4147.
19