Process Steps At The Dentist's - Amann Girrbach girobond nbs Instrucciones De Uso

P R O C E S S S T E P S A T T H E D E N T I S T ' S

Process steps at the dentist's

Fixation
E N
Due to the high strength and stability of the frames, conventional fix-
ation with commercially available cement is possible in most cases.
Post-processing at the dentist's
When grinding is required by the dentist while installing the work into
the patient's mouth, the units must be well re-polished to a high gloss.
For grinding, we recommend using only diamond grinding points (rec-
ommended grain approx. 40 μm). For polishing, we recommend using
diamond polishing bits.
When the work is not sufficiently polished, the antagonist may
become damaged due to abrasion!
Follow-up examination at the dentist's
It is urgently recommended to check the dentures in the patient's
mouth once a year. In this, the remaining dentition, the antagonists
and the soft tissue are also to be inspected. Corrective measures are
to be undertaken as required. Here, it is also important that the
objects are polished afterwards to a high gloss.
34
NOTE: