Health O Meter 2210KL Manual Del Usuario página 10

OPERATING INSTRUCTIONS (CONT)
Using the Tare Function
When using this scale, the weight of any object, such as a blanket, accompanying the baby
being weighed can be subtracted from the total weight to determine the net weight of the baby
alone. The Tare function automatically performs this subtraction, avoiding the need for manual
calculations.
1. Turn the scale on and wait for the display to read "0".
2. Place the object (i.e. blanket) on the tray. The weight of the object will be displayed.
3. Press the TARE button. "NET WT" and "0.0" will be displayed.
If the object is removed from the platform, its weight will be displayed as a negative value.
4. Place the baby on the tray with the object still on it. The readout will now display the
baby's net weight.
5. Press ON/ZERO to return the scale back to normal weighing operation.
Using the Weightlock Function
When using this 2210KL scale, the weight of any object over 512 grams will be locked on the
display even after the baby has been removed from the tray allowing the care provider to tend to
the needs of the baby without having to remember the weight measurement. This value is
stored and can be recalled even after the scale has turned itself off.
When the baby's weight is locked, "PRIOR WT" is displayed (Fig. 5). The weight will remain
displayed even after the baby is removed from the tray. No further weighings can take place
until Weightlock is deactivated.
Weightlock is deactivated by pressing ON/ZERO or REWEIGH/RECALL (Fig 6).
TARE
Figure 3: Tare button
Figure 4: Net weight display
gram
Figure 5: Weightlock display
REWEIGH
RECALL
Figure 6: Reweigh/Recall button
10
NET WT
gram
PRIOR WT.