Motion Detection - Health O Meter 2210KL Manual Del Usuario

OPERATING INSTRUCTIONS (CONT)

Motion Detection

Motion detection uses a proprietary technology that automatically provides accurate weight
measurement when there is excessive motion on the tray.
If there was considerable motion during the recent weight measurement, motion detection will
activate after seven seconds and "AVERAGE WT" will be displayed along with "PRIOR WT"
(Fig. 8).
PRIOR WT
AVERAGE WT
gram
Figure 8: Motion detected during weighing
Battery Life Indicators
This scale has excellent battery life with most users getting more than two years from a single
set of batteries. Your battery longevity will vary with the frequency of use and the length of the
Auto-Off timer. To help ensure you are never without the use of your scale, it comes with a
battery life indicator.
• Battery Pictorial: Located in the bottom left corner of the LCD display is a facsimile of a
battery. With new batteries, all three segments will be dark. As the batteries become depleted,
the segments will turn off.
• Flashing Battery: When the battery pictorial is empty and the frame is flashing, replace the
batteries. (Fig. 9).
NOTE: Properly dispose of old batteries. Install six (6) new alkaline C-cell batteries. Do not mix
new and used batteries.
Figure 9: Battery Indicators
12