CAUTIONS AND WARNINGS
To prevent injury and damage to your scale, please follow these instructions very
•
carefully.
Assemble and operate the scale per the enclosed user instructions.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation
•
according to the procedure described in this manual.
Operating this scale at voltages and frequencies other than specified can
•
damage the equipment and will void the warranty.
Do not transport the scale with any weight on the platform.
•
Do not exceed recommended weight limit of 45 lb / 20 kg / 20,000 g for
•
this scale.
Do not use in the presence of flammable or explosive materials.
•
If the scale becomes damaged, it should not be operated until properly serviced.
•
When replacing / inserting batteries, be sure to use all new batteries.
•
To prevent patient injury, the patient must be attended throughout the
•
entire weighing event.
Do not gas sterilize or autoclave the scale.
•
Scales contain delicate sensors. Do not bang into doors, walls, etc., as
•
damage may result.
No scale should be used for patient transfer. The manufacturer assumes
•
no responsibility for patient injury or scale damage should this warning be
ignored.
3