Movement V3 Manual De Propietario página 28

HORIZONTAL BICYCLE
Description of the parts contained in the packaging (horizontal bicycle)
- 01 Electronic Module - 01 Chassis in metal tube- 01 Fairing fixed to the chassis- 01
Magnetic brake set inserted in the fairing and fixed to the chassis- 01 split support column for
the electronic module- 01 horizontal support column for the saddle- 01 Bench with insert for
horizontal column + adjustment key- 01 separate column for seat insertion + connectors-
01 Backrest for the bench- 02 Loose feet with 02 levelers each, 01 simple and 01 with column
and support for the bench- 04 Connectors , 02 for handgrip sensors for heart rate and 02 for
the electronic module- 02 candle-feet- 12 screws- 01 Allen key- 01 spanner number 16- 02
pedals (WARNING !!! The pedals are not the same , 01 corresponds to the right side - letter R
(right) at the tip of the screw -, another to the left side - letter L (left) at the tip of the screw).
Fixing in reverse order may damage the fixing thread of both the pedal and the pedestal.
2
A
A1
Fit the support column
tube A to point A1.
1
Remove the equipment from
the box and arrange the loose
parts to identify them.
A
A1