Identification Of Components - Comet MTP MC 8 Instrucciones Para El Ensamblaje -Uso Y Mantenimiento

PERFORMANCE
Max level of pressure/sound power - uncertainty
• MTP MC 8 - MTP MC 18 - MTP MC 20/20 - MTP MC 25
• MTP MP 20 - MTP MP 30 - MTP P 36/10 -
MTP P 36/15 - MTP APS 31 - MTP APS 41)
• MTP P 48 - MTP APS 51 - MTP APS 61 - MTP APS 71 -
MTP YA 65
MAX WEIGHT
• MTP MC 8 - MTP MC 18
• MTP MC 20/20 - MTP MC 25
• MTP MP 20 - MTP MP 30
• MTP P 36/10 - MTP P 36/15
• MTP P 48
• MTP APS 31 - MTP APS 41
• MTP APS 51 - MTP APS 61 - MTP APS 71
• MTP YA 65
In the case of a motor pump equipped with combustion engine, indicated performance levels refer to an atmospheric
Specifications and details are approximate. The Manufacturer reserves the right to make all changes to the motor
CAUTION
• To dispense maximum power, the combustion engine requires at least 10 hours running in at a load below
15÷20% with respect to max performance of the motor pump.
• For the combustion engine, the max power that can be supplied drops as the altitude and room temperature
increase (drop of about 3.5 % every 305 m above sea level and a drop of about 1% every 5.6 °C above 16 °C).
In the event of the motor pump being used at high altitudes or with high room temperatures, refer to the
use and maintenance manual of the combustion engine for any precautions to be taken in such cases.
Refer to Figures from 1 to 11 at the beginning of the manual.
1. ON/OFF switch (only electric motor pumps)
2. Reduction gear oil filling cap
3. Pressure adjustment knob
4. Bypass/pressure lever
5. Pump oil filling cap
6. Oil positive displacement compensator
7. Suction fitting
8. Hook
WARNING
• Should the identification plate deteriorate during use, contact the Manufacturer or a Skilled Technician to
have it restored.
The identification plate (12) shows the motor pump model, the serial number, the year of manufacture and the
main electrical and mechanical specifications (max rotation speed, max pressure, weight, power supply voltage,
Max pressure and flow rate are shown on the motor pump
pressure of 1013 hPa with room temperature of 16 °C/61 °F.
pump deemed necessary.

IDENTIFICATION OF COMPONENTS

MOTOR PUMP IDENTIFICATION PLATE
Motor pump
with electric motor
identification plate (12).
74 dB(A) - 1 dB(A)
87 dB(A) - 1 dB(A)
84 dB(A) - 1 dB(A)
101 dB(A) - 1 dB(A)
92 dB(A) - 1 dB(A)
107 dB(A) - 1 dB(A)
9 kg - 20 lb
15 kg - 33 lb
29 kg - 64 lb
35 kg - 77,2 lb
43 kg - 95 lb
42 kg - 93 lb
61 kg - 135 lb
61 kg - 135 lb
9. Pressure accumulator
10. Tap
11. Pressure gauge
12. Motor pump identification plate
13. Bypass connector
14. Delivery fitting
15. Tap lever
Motor pump
with combustion engine
82 dB(A) - 1 dB(A)
99 dB(A) - 1 dB(A)
91 dB(A) - 1 dB(A)
103 dB(A) - 1 dB(A)
93 dB(A) - 1 dB(A)
108 dB(A) - 1 dB(A)
17 kg - 38 lb
25 kg - 55 lb
29 kg - 64 lb
-
25 kg - 55 lb
31 kg - 68 lb
56 kg - 124 lb
55 kg - 121 lb
EN
25