Publicidad
Idiomas disponibles
Idiomas disponibles
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Tape Measure
Pencil
Safety Glasses
Drill
Before You Begin
CAUTION: Risk of product damage. Siliconized acrylic caulk must
be used to secure the lavatory to the vanity. Do not use 100%
silicone sealant, which will damage the finish of the vanity.
Observe all local building codes.
Prior to installation, unpack the new product and inspect it for
damage. Return the product to its protective carton until you are
ready to install it.
Make sure the finished wall is straight and plumb, and the floor
is flat and perpendicular to the finished wall.
This vanity is designed to allow most base moldings to pass
behind the vanity. Remove any moldings that may inhibit the
vanity from being flush against the finished wall.
It is recommended that the drawer be removed from the vanity
before beginning the vanity installation. Doing so will ease the
installation process. Refer to the section contained in this guide
for proper removal.
1061218-2-A
Assorted
Siliconized
Screwdrivers
Acrylic Caulk
Plus:
• Wood Screws
• Framing Nails
• 3/4" Plywood
Level
2
Kohler Co.
Publicidad
