Publicidad
Idiomas disponibles
Idiomas disponibles
A value of 1-50 appears at the top.
The selected value plus 10050 will be
the ANT device ID. Make sure you do
not have two monitors with the same
ID in the same installation.
In the middle, enter the units (0->
metric; 1-> English).
The lower part shows the software
version.
Once the values have been entered,
press the key
save the settings and exit to the initial
screen.
7.- DATA INTRODUCTION
With the monitor on, press the keys
and
access the setting screen. Fig. 12.
Press the key
change value.
for 3 seconds to
for 3 seconds to
to confirm and
Press the keys
adjust the value.
At the top enter your age.
En la parte intermedia introduzca el
valor de su FTP. (0 si quiere trabajar
por watios)
En la parte inferior introduzca su peso.
Once the values have been entered,
press the key
save the settings and exit to the initial
screen.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
10
or
for 3 seconds to
to
Publicidad
