Stryker SDC Ultra Guia Del Usuario página 18

For Login with Username and Password:
Note The FTP server should be setup for the users who have access.
Passwords should be all caps.
1. Create a folder under the root folder of the FTP server folder.
3. Create another folder under the SDC folder with the same name as the
username.
Follow steps 3 - 5 above, except in step 5 uncheck the Anonymous
4.
Login checkbox and enter the password.
Directory Structure:
<Default FTP path>\SDC\Username\?????MMDDYYYY_HHMMSS
where, ?????: First 13 characters of the Patient's Name / ID entered
Username: Doctor's Username which can be the same as his/her Notematic
ID MMDDYYYY_HHMMSS: Date/Time stamp to guarantee uniqueness
Note If there are any problems writing the data, check if the read/write
permissions of the FTP server are set. Also make sure that the firewall
settings on the server do not block the FTP port.
Protocol Used: Studio3 Media Server
Setup Requirements
1. A TCP/IP network.
2. A Stryker Studio3 Media Server installed and configured. .
Instructions
1. Enter the IP address of the Studio3 Media Server into the SDC Ultra™
Studio3 tab in the Config menu.
Select the Studio3 checkbox in the Save Settings screen to enable the
2.
Studio 3 Save button.
To save the images and videos, press the Studio3 Save button from the
3.
Save menu. A confirmation message will appear to indicate that the case
has been added to the Studio3 transfer queue.
To view the pending/completed transfer queue, press the Studio3 tab in
4.
the Archive menu.
12