Metabo ELEKTRA BECKUM KGS 301 Manual De Uso página 16

XA0025E1.fm
ENGLISH
A
Danger when sawing small
cutoffs!
The fence has a V-shaped relief to
accommodate the saw blade when it is
tilted for bevel cuts from between 0° to
45°. With small cutoffs there is a risk of
the cutoffs being picked up by the saw
blade and hurled through the V-shaped
relief.
45°
Rotating table set to left or right
(mitre cut)
0°
15°
22.5°
30°
45°
2
Betriebsanleitung
It is therefore necessary to use a
wooden auxiliary fence when small cut-
offs will result in a sawing operation.
This auxiliary fence is to be made by the
user from a piece of suitable scrap.
45°
30°
This auxiliary fence is attached to the
0°
15°
0° 15°
30°
fence with screws and is cut when the
workpiece is cut:
Max. stock cross section
0°
307 mm wide x 58 mm high
296 mm wide x 58 mm high
283 mm wide x 58 mm high
265 mm wide x 58 mm high
217 mm wide x 58 mm high
For each bevel angle a relevant auxiliary
fence must be used.
Sawhead tilt
(bevel cut)
292 mm wide x 53 mm high
282 mm wide x 53 mm high
269 mm wide x 53 mm high
252 mm wide x 53 mm high
206 mm wide x 53 mm high
45°
30°
0°
15°
0° 15°
30°
45°
45°
30°
0°
15°
15°
0°
30°
45°
45°