Descargar Imprimir esta página

Transport And Movement; Storage; Checks; Installation - Whirlpool ACO 023 Uso E Manutenzione

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
5.

TRANSPORT AND MOVEMENT

READ CAREFULLY THE WARNINGS CONTAINED IN THIS MANUAL AS THEY SUPPLY
IMPORTANT INFORMATION REGARDING THE SAFETY OF INSTALLATION, USE AND
MAINTENANCE.
KEEP THIS MANUAL SAFE FOR FURTHER CONSULTATION.
5.1
TRANSPORT AND MOVEMENT
The transport and movement of the upright and/or table refrigerators must take place in the upright
position, respecting any indications shown on the packaging.
Transport must be carried out by qualified staff.
The upright and/or table refrigerators must be transported in such a way as to avoid any damage.
The appliance is prepared for transport with or without packaging depending on the means of transport and
the route. If packaged, it is in cardboard or wood, adequately protected.
Movement must be carried out using a lift truck or trans-pallets with suitable forks (length at least 2/3 of the
dimensions of the object)
5. 2

STORAGE

In the case of long periods of inactivity, the upright and/or table refrigerators must be stored with attention to
the relevant storage place and time:
Store the upright and/or table refrigerator in an enclosed area;
Protect upright and/or table refrigerator from bumps or stress;
Protect upright and/or table refrigerator from high thermal variation;
Avoid upright and/or table refrigerator coming into contact with corrosive substances.
5. 3

CHECKS

Before putting upright and/or table refrigerator into operation, it is necessary to carry out a series of checks to
prevent errors or accidents during the activating phase:
• Check that there has not been any damage to the upright and/or table refrigerator during assembly.
• Check with care the integrity of the control panel, the electric cable and the tubes.
• Check the precise connection to external energy supply.
• Check the free movement and rotation of any moving parts.
6.

INSTALLATION

For an optimum functioning of the unit it is advisable to place the refrigerator in a zone with a
good ex change of air and far away from any sources of heat.
Damage to the appliance caused during transport and movement is not covered
by the GUARANTEE. Repairs or substitution of damaged parts is at the
Customer's expense.
23

Publicidad

loading